94 94 19 Removing and installing drive motor for headlight beam adjustment · The adjusting screws for lateral and for vertical

911 Carrera (996) Lights, lamps, switches exterior 94 94 19 Removing and installing drive motor for headlight beam adjustment Note The adjusting screws for lateral and for vertical 3. Swivelthe drive motor up, press down the and lateral adjustment must not be moved du- locking tab (arrow)with a small screwdriver ring removal or installation of the drive motor and carefully pull out the drive motor (plastic (this changes the adjustmenttravel). housing). Switch for headlightbeam adjustmentin position "0". Removal ~ 1. Removethe headlightand open the rear co- ver. Disconnectthe electrical plug connection ~ on the drive motor. 2. Undo the fastening screw and remove the drive motor by turning counter-clockwise (bayonetlock). 74 -97 =:J '-::;;;::// Jl~ Installation 1. Press the ball head into the ball socket and secure the drive motor by turning clockwise (bayonetlock), 0 2. Secure the locking screw and snap in the plug J connection. "1:::::::::::::J 3. Close cover and install headlight. Carry out function check of headlightbeam adjustment. 73 -97 94 94 19 Removing and installing drive motor for headlight beam adjustment 94 -9 Printed in Germany, 1997 996941 ~