94 33 19 Removing and installing bulb for taillight · 1. Open engine compartmentlid. Unscrew

911 Carrera (996) Lights, lamps, switches exterior 94 33 19 Removing and installing bulb for taillight Removal 1. Open engine compartmentlid. Unscrew Installing taillight holder M6 x 15 fastening screw and pull out the tail light to the rear. Note An assemblyaid is moulded on the tail light holder. This assemblyaid is broken off after the holder is adjusted and fastened. 1. Install holder and close the engine compart- ment lid. The assemblyaid must touch the body and the engine compartmentlid (see arrows). D / / /"" ./ A -Rear fog light 111_98 B -Reversing light C -T aillighVbrake light D -Direction indicator light 2. Turn bulb socket counter-clockwiseand remove from the taillight. 3. Take defective bulb out of the bulb socket (bayonetlock), 307_99 Installation 2. Fastenthe holder and break off the assembly 1. Install new bulb and ensure that it is correctly aid. seated (bayonet lock), 3. Installthe taillight and check the gap dimen- 2. Rotate bulb socket clockwise and engage. sion (3 mm) using a star gauge. If necessary, Install the taillight, making sure the retaining remove the taillight again and carry out fine lugs are seated properly. adjustmenton the holder. Gap dimensionand star gauge: see "Body gap dimensions"in 3. Perform a function test of all bulbs. RepairGroup 5 -Body. 94 33 19 Removing and installing bulb for taillight 94 -29 Printed in Germany -29, 1999 9969417