fullymatted.
Back to search
996 Turbo diagnostic manual — Turbo applicability only / PAGE 694

91 PCM 2 / CDR 23 911 Turbo (996) · Diagnosis/troubleshooting

Add to repair workspace
Open repair workspace
Open full manual Original source
Original manual page 694
Read extracted page text

OCR can contain errors. Check the original page image for exact wording, warnings and specifications.

91 PCM 2 / CDR 23 911 Turbo (996) Diagnosis/troubleshooting Work instruction Display OK If not OK 1 Checking wiring har- ♦Connect the Porsche System → End Fault code is still ness and front left loud- Tester II No. 9588 to the diag- displayed. speaker and left door nostic socket; switch on the Step 2 box ignition and the Porsche Sys- tem Tester ll No. 9588. ♦Select vehicle type 911 (996) and start the automatic control module search. ♦Select 'PCM2' in the "Control modules" menu. ♦Select 'External amplifier' in the PCM2 menu. ♦Select 'Fault memory' in the menu and click the > > key. ♦Read out fault memory. ♦Erase fault memory. ♦Remove ignition key and switch on ignition again. ♦Read out fault memory. ♦Extract ambient data, press the >> key. 2 Checking wiring har- ♦Switch off ignition. = 5 Ω Step 4 ness and front left loud- ♦Pull plug A off the amplifier. Step 3 speaker and left door ♦Check resistance on plug A pin box 27 and pin 32. 3 Checking wiring har- ♦Switch off ignition. = 4 Ω Step 4 ness and front left loud- ♦Pull plug A off the amplifier. Step 10 speaker and left door ♦Measure resistance on plug A box pin 25 and pin 38. 4 Checking wiring har- ♦Pull plugs off loudspeakers. < 5 Ω Open circuit in wir- ness to front left door ♦Check resistance of plug A of Step 5 ing/short circuit to speaker and left door ground. Repair wir- amplifier pin 32 to plug on box ing harness. front right door speaker pin 2. → End 5 Checking wiring har- ♦Check resistance of wiring < 5 Ω Open circuit in wir- ness to front left door from plug A of amplifier pin 27 Step 8 ing/short circuit to speaker and left door to plug on front right door ground. Repair wir- box speaker pin 1. ing harness. → End 6 Checking wiring har- ♦Check resistance of wiring < 5 Ω Open circuit in wir- ness to front left door from plug A of amplifier pin 25 Step 7 ing/short circuit to speaker and left door to plug on front left door ground. Repair wir- box speaker pin 2. ing harness. → End 91-94 page 2 9101 8004 Harman external amplifier 8004VSlwl Printed in Germany – 29, 2002

This is a source reference. Confirm exact model applicability in the original material.