fullymatted.
Back to search
Group 9 · Electrics / PAGE 130

94 15 05 Left / right traffic conversion for Litronic headlights · Warning Changing over Li

Add to repair workspace
Open repair workspace
Open full manual Original source
Original manual page 130
Read extracted page text

OCR can contain errors. Check the original page image for exact wording, warnings and specifications.

94 15 05 Left / right traffic conversion for Litronic headlights Warning Changing over Litronic headlights Warning signs (yellow triangle 1. Switch off the light. with black high-voltage arrow) & Releasethe headlighthousing and pull out indicate high voltage (risk of fatal injury). forwards slightly. > The light must always be switched 2. Disconnectthe electricalplugconnectionof off when removing and installing the automaticheadlightbeamadjustment these components(control module, and removethe headlighthousing. ignition unit, gas discharge lamp, servo motor). Once removed, 3. Releaseand open the cover with control a headlight is not under high module. voltage. 4. Push the changeoverlever A to position T > The gas dischargelamp (02S lamp) (tourist setting). may only be operated when installed in the reflector and with the headlightinstalled. --'r--- Note 0 Masking film for left/right-hand traffic must not be affixed to Litronic headlights. These headlights incorporate a changeover lever for driving in countries with lefVright-hand traffic. '\\ 10' This lever is located on the left and right on the housing in front of the gas discharge lamp. '-. 0 T = Tourist setting "on" 355_98 a = Tourist setting "off" Installation 1. Lock the cover with control module and insert the headlighthousing in the wing. 2. Engage the electrical plug connection of the automatic headlight beam adjustment and lock the headlight housing in the wing. 94 15 05 left / right traffic conversion for litronic headlights 94 -43 Printed in Germany -18. 1998 9969435 ~I

This is a source reference. Confirm exact model applicability in the original material.