94 79 19 Removing and installing angle sensor for automatic headligirt beam adjusbnent · Rear angle sensor

911 Carrera (996) Lights, lamps, switches exterior 94 79 19 Removing and installing angle sensor for automatic headligirt beam adjusbnent Rear angle sensor Removal Installation 1. Hold the rotary lever of the linkage with 1. Fastenthe angle sensor to the retaining the second open-endedwrench and detach. bracket and install. Push back the rubber cover over the electrical plug connection and detach 2. Engagethe electrical plug connectionand the plug connection from the angle sensor. carefullypull the rubber cover over the plug connection(protects againstwater leaking in). 2. Detach the retaining bracket for the angle sensor, combination wire and brake line 3. Secure the linkage to the rotary lever from the body. (tightening torque 7 Nm (5.0 ftlb.)). 4. Once the angle sensor has been installed, /.e/ '--- the control module must be recalibrated with the Porsche System Tester 2. After this, the headlights must be readjusted using a standard 5 mm ball-head screwdriver. Note For details of headlightadjustment,refer to Group 0 Entire vehicle -General, Repair Group Maintenance03, Pages03 -6 to 03 -8. -:..:..: 417_98 3. Detachthe anglesensorfrom the retaining bracketand removeit. 94 79 19 Removing and installing angle sensor for automatic headlight beam adjustment 94 -49 Printed in Germany -18, 1998 9969435 ,