94-5Control module function · A new control module can be coded in menu item Coding.

911 Turbo (996) Headlight beam adjustment HBA 01 94 94-5Control module function Coding A new control module can be coded in menu item Coding. Procedure 1. Connect PST2 and switch on the ignition 2. Select vehicle type 911 (996) and start the automatic control module search 3. Select control module HBA 4. Select menu item Coding 5. Select vehicle type 911 (996) and start coding with the F8 key Calibration The control module can be calibrated under menu item Calibration. Calibration is necessary in the following cases: ♦When replacing the servomotors for HBA ♦When replacing the entire headlights ♦When replacing the control module ♦When replacing angle sensors for HBA ♦When modifying the running gear Note! Adjust the headlights after calibration. Procedure 1. Connect PST 2 and switch on ignition 2. Select vehicle type 911 (996) and start the automatic control module search 3. Select control module HBA 4. Select menu item Calibration and follow the instructions dis- played by the PST2 9492 Control module function 94-5 page 1 Printed in Germany, 2001 sgf_lw01