96-7Fault code 1 · Door(s) secured and terminal 15 on

911 Turbo (996) Alarm system I 48 96 96-7Fault code 1 Door(s) secured and terminal 15 on Diagnostic conditions • Ignition on Possible cause of fault ♦Incorrect coding (country coding) ♦Short circuit to voltage/ground or open circuit in the wiring between the control module and door lock ♦Door lock faulty Affected terminals Connector A, terminals 5, 28, 29 Diagnosis/troubleshooting Work instruction Display OK If not OK 1 Check country coding ♦Connect PST 2 and switch on The control module Recode the control ignition. is correctly coded module ⇒Step 2 → End ♦Check the country coding in the menu item "Modify coding" 2 Check micro switches of ♦Switch on ignition Driver’s side not ⇒ Step 3 the door locks secured ♦Select menu item "Input signals" Passenger’s side not ♦Select switch positions "driver’s secured side secured" and "pasenger’s → End side secured" 3 Check wiring from alarm ♦Switch off ignition ∞ Ω Repair wiring har- system control module to ⇒ Step 4 ness ♦Pull plug A off the control mod- door lock for short circuit → End ule to ground ♦Depending on the test result from step 2, pull plug off the driver’s and/or passenger’s door lock ♦Measure resistance between plug A on control module pin 5 and ground ♦Measure the resistance between plug A pin 28 and ground 9601 Fault code 1 96-7 page 1 Printed in Germany – 4, 2001 1xxxxi48