fullymatted.
Back to search
996 Turbo diagnostic manual — Turbo applicability only / PAGE 996

96-8Fault code 2 · Door lock barrel "closed", activated longer than 60 s

Add to repair workspace
Open repair workspace
Open full manual Original source
Original manual page 996
Read extracted page text

OCR can contain errors. Check the original page image for exact wording, warnings and specifications.

911 Turbo (996) Alarm system I 48 96 96-8Fault code 2 Door lock barrel "closed", activated longer than 60 s Diagnostic conditions • 60 s waiting time Possible cause of fault ♦Incorrect operation, door lock activated in direction "closed" for longer than 60 s ♦Short circuit to voltage/ground or open circuit in the wiring between the alarm system control module and both door locks ♦Door lock faulty Affected terminals Plug A, terminal 35 Diagnosis/troubleshooting Work instruction Display OK If not OK 1 Check wiring between ♦Pull plug A off the control mod- ∞ Ω Repair wiring har- alarm system control ule ⇒ Step 2 ness module and door lock → End ♦Pull plug off both door locks (driver/passenger) for ♦Measure the resistance between short circuit to ground plug A pin 35 and ground 2 Check wiring between ♦Switch on ignition 0 V Repair wiring har- alarm system control ⇒ Step 3 ness ♦Measure voltage between plug A module and door lock → End on control module pin 35 and (driver/passenger) for ground short circuit to B+ 3 Check wiring between ♦Switch off ignition < 5 Ω Repair wiring har- alarm system control ⇒ Step 4 ness ♦Measure resistance between module and door lock → End plug A pin 35 and plug on (driver/passenger) for driver’s door lock pin 5 open circuit ♦Measure resistance between plug A pin 35 and plug on pas- senger’s door lock pin 5 4 Detect faulty door lock ♦In the menu item "Input signals", Door lock barrel not ⇒ Step 6 select "Door lock barrel" actuated ⇒ Step 5 ♦Connect plug on passenger’s door lock 9601 Fault code 2 96-8 page 1 Printed in Germany – 4, 2001 2xxxxi48

This is a source reference. Confirm exact model applicability in the original material.