996 Turbo diagnostic manual — Turbo applicability only / PAGE 1030
96-29Fault code 23 · W lead (DME - immobilizer), short circuit to B+
Read extracted page text
OCR can contain errors. Check the original page image for exact wording, warnings and specifications.
911 Turbo (996) Alarm system I 48 96
96-29Fault code 23
W lead (DME - immobilizer), short circuit to B+
Diagnostic conditions
• Ignition on
Possible cause of fault
♦Short circuit to voltage in the communication lead between the
alarm system control module and the DME control module
Affected terminals
Plug A, terminal 23
Diagnosis/troubleshooting
Work instruction Display OK If not OK
1 Check wire from the ♦Switch off ignition 0 V Repair wiring har-
alarm system control ⇒ Step 2 ness ♦Pull plug A off the alarm system
module to the DME con- → End control module
trol module for short cir-
♦Pull plug A off the DME control cuit to B+.
module
♦Switch on ignition
♦Measure voltage between plug A
on alarm system control module
pin 23 and ground
2 Check wire from the ♦Measure resistance between < 5 Ω Repair wiring har-
alarm system control plug A on alarm system control ⇒ Step 3 ness
module to the DME con- module pin 23 and plug A on → End
trol module for open cir- DME control module pin 3
cuit
3 ♦Replace DME control module as a test → End
9601 Fault code 23 96-29 page 1
Printed in Germany – 4, 2001 23xxxi48
This is a source reference. Confirm exact model applicability in the original material.
