Alarm system I 48 911 Turbo (996)96 · Work instruction Display

Alarm system I 48 911 Turbo (996)96 Work instruction Display OK If not OK 6 Check leads from the ♦Measure resistance between < 5 Ω Repair wiring har- alarm system control plug A on alarm system control ⇒ Step 7 ness module to the servomo- module pin 19 and pin 9 on → End tors for open circuit plug of door lock (driver’s side/passenger’s side) 7 Check leads from the ♦Measure resistance between ∞ Ω Repair wiring har- alarm system control plug A on alarm system control ⇒ Step 8 ness module to the door locks module pin 5 and ground → End for short circuit to ♦Measure resistance between ground plug A on alarm system control module pin 28 and ground 8 Check leads from the ♦Measure resistance between < 5 Ω Repair wiring har- alarm system control plug A on alarm system control ⇒ Step 9 ness module to the door locks module pin 5 and pin 7 on plug → End for open circuit of door lock on driver’s side ♦Measure resistance between plug A on alarm system control module pin 28 and pin 7 on plug of door lock on passen- ger’s side 9 Check output signals of ♦Connect special tools 9616 A voltage pulse can ⇒ Step 11 the control module and 9617 to the alarm system be measured with control module the digital multime- ter ♦Reconnect plugs to both door ⇒ Step 10 locks ♦Switch on ignition ♦Select "Secure doors" in menu item "Drive links" ♦Carry out a drive link test and simultaneously measure the voltage on special tool 9616, pin 19 and ground 10 ♦Replace door lock → End 11 ♦Replace alarm system control module → End 96-61 page 2 9601 Fault code 59 59xxxi48 Printed in Germany – 4, 2001