Work instruction Display OK If not OK · 3 Check leads between the ♦

911 Turbo (996) Alarm system I 48 96 Work instruction Display OK If not OK 3 Check leads between the ♦Measure resistance between < 5 Ω Repair wiring har- alarm system control plug A on alarm system control ⇒ Step 4 ness module and the door module pin 5 and pin 7 on plug → End locks for open circuit of door lock on driver’s side ♦Measure resistance between plug A on alarm system control module pin 28 and pin 7 on plug of door lock on passen- ger’s side ♦Measure resistance between plug A on alarm system control module pin 30 and pin 3 on plug of door lock on driver’s side ♦Measure resistance between plug A on alarm system control module pin 32 and pin 3 on plug of door lock on passen- ger’s side ♦Measure resistance between plug B on alarm system con- trol module pin 9 and pin 2 on plug of the driver’s side and passenger’s side door locks ♦Measure resistance between plug B on alarm system con- trol module pin 9 and ground 4 Check micro switches of ♦Push plugs A and B back onto Driver’s side not ⇒ Step 11 the two door locks (pos- the alarm system control mod- locked sible detection of faulty ule Passenger’s side driver’s/passenger’s not locked ♦Reconnect plugs to both door door lock) Driver’s side not locks secured (not appli- ♦Close doors cable to USA vehi- ♦Vehicle not secured and not cles) locked Passenger’s side not secured (not ♦Select "Driver’s side locked", applicable to USA "Passenger’s side locked" vehicles) "Driver’s side secured" and ⇒ Step 12 "Passenger’s side secured" in menu item "Input signals". 9601 Fault code 60 96-62 page 3 Printed in Germany – 4, 2001 60xxxi48