01 Sales check · Deactivating the transport lock in the roll-over protection system,

911 Carrera (996) Sales check 01 Sales check Deactivating the transport lock in the roll-over protection system, 911 Carrera Cabriolet General 2. Wait until the start-up screen of the Porsche System Tester 2 appears The transport lock in the roll-over protection system is activated on delivery to protect 3. Press the double arrow key [»] the vehicle during transport. The red warning to go to the next level light in the instrument cluster lights up. 4. Select the vehicle type 911 (996) Before starting the vehicle for the first time, in the left-handwindow using the transport lock must be deactivated in the arrow key [v] order to ensure that the system functions. 5. Press the -')0 key to activate & I CAUTION:Risk of system failure if the right-handwindow 6. Using the arrow key [v ] , select .the following steps are not performed correctly. the Roll-overprotection control module In serious cases, the system will not be actuated. 7. Press the double arrow key [»] > The red warning light in to go to the next level the instrument cluster must go off when the transport 8. Select Transport lock using the arrow key [v ] lock has been deactivated. 9. Press the double arrow key [»] > After the transport lock has been to go to the next level deactivated,check the control module for stored faults using 10. Select not active using the arrow key [v the Porsche System Tester 2. 11. Press key F8 (coding) Procedure 12. Press the [Esc] key 2x 1. Switch on the Porsche System Tester 2 with the ignition off, then switch the ignition on. Whenthe red warning light goes out, deactivation of the transport lock is complete. 01 Sales check 01-1 Printed in Germany -II, 1998 99601_1