Safety instructions for roll-over protection system · Danger of injury if roll-over bar is actuated when roll-over

Safety instructions for roll-over protection system Danger of injury if roll-over bar is actuated when roll-over bar module is being removed! .Remove the roll-over bar modules only after the roll-over bar has been extended (triggered)! Safety instructions for plug location plan (body) Danger of corrosion and of unwanted water penetration when removing plugs! The body apertures are sealed with plugs in the factory, and must be resealed with the plugs provided following disassembly or repair work! Safety instructions for water drains (body) Water drainage hoses can be pushed out or pressed in by blowing them out of the body during cleaning! The water drainage hoses must be blown out carefully during cleaning using compressed air! Safety instructions for welding Irritation to respiratory tracts from toxic zinc oxide emitted when welding galvanized steel! .The work area must be well ventilated! .Smoke gases must be removed with a suitable extraction system! (Refer to Workshop Equipment Manual, Group 5). 5 Safety instructions for body repair 5-1 page 7 Printed in Germany -42, 2000 c5xxxxxl Downloaded from www.Manualslib.com manuals search engine .