Step 11: Install Pad Retaining Spring Retaining Pin · Retaining Clip, and sensors.

Step 11: Install Pad Retaining Spring Retaining Pin Retaining Clip, and sensors. The sensors go back into place with a little pressure. Sometimes you can get them in with your fingers, some times you need the needle-nose pliers. Be sure to grab the plastic part and position the pliers so that they won't bottom out before the sense is fully seated. Make sure they are fully seated and that the wires are back in their strain reliefs in the retaining spring and the caliper itself. If you're installing race pads, they may not have a hole for