Porsche 996 — Center Console Installation / PAGE 2
2. Pull out the batwing piece. Disconnect the two · heater switches. This car has some additional
Read extracted page text
OCR can contain errors. Check the original page image for exact wording, warnings and specifications.
2. Pull out the batwing piece. Disconnect the two
heater switches. This car has some additional
wiring for an alarm.
3. Using the MAcarbon 90° install tool, pull up at the
back of the shift boot. There are four clips; two at
the rear and two at the front. Then rotate the boot
forward to disengage the front pins.
4. Using the allen wrench, loosen the set screw and
remove the shift knob.
5. Remove the screw located at the front of the
console.
This is a source reference. Confirm exact model applicability in the original material.