Porsche 996 — Center Console Installation / PAGE 5
14. Remove the front right screw. · 15. Pull off the side plate. Examine the CF panel to see
Read extracted page text
OCR can contain errors. Check the original page image for exact wording, warnings and specifications.
14. Remove the front right screw.
15. Pull off the side plate. Examine the CF panel to see
how the tabs are oriented before starting. Pull out
from the top and then once the two upper tabs are
disengaged, pull upwards.
16. The console should now start to lift from the car.
With access to the underside, remove the power
wire that goes to the storage box sensor. If you
do not remove it, you will break
the sensor.
17. With the console out of the car, remove the front
and rear trim panels by pulling up and out.
This is a source reference. Confirm exact model applicability in the original material.