996 Carrera — RoW M030 Sport Suspension Installation / PAGE 2
5/9/2014 RoW M030 Sport Suspension Install - Carrera (996) - Mods - 996 (Carrera) - DIY - Tutorials - RennTech.org Foru
Read extracted page text
OCR can contain errors. Check the original page image for exact wording, warnings and specifications.
5/9/2014 RoW M030 Sport Suspension Install - Carrera (996) - Mods - 996 (Carrera) - DIY - Tutorials - RennTech.org Forums
4. Jack up the car and remove the wheels.
5. Loosen the 18 mm sway bar bolt that is on the bottom of the strut (counter with open-end wrench).
6. Take off the caliper from the hub. Don’t let it fall as it may stretch and break the brake line. (*Porsche
recommends replacing the two caliper bolts and not re-using them)
7 . Remove the nut on the strut spindle assembly, the abs wires and brake lines.
8. Remove the three (3) 13 mm bolts from the top of the trunk that holds the strut to the body. Peek down in
and note the installed position of the spring strut mount. The arrow markings must point to the outer side of
the vehicle (A). The shock absorber piston rod is thereby shifted outwards.
http://www.renntech.org/forums/tutorials/article/88-row-m030-sport-suspension-install/?forcePrint=1&_k=893ccccbb84b100141dbbbe5e95342e1 2/12
This is a source reference. Confirm exact model applicability in the original material.