5/9/2014 RoW M030 Sport Suspension Install - Carrera (996) - Mods - 996 (Carrera) - DIY - Tutorials - RennTech.org Foru

5/9/2014 RoW M030 Sport Suspension Install - Carrera (996) - Mods - 996 (Carrera) - DIY - Tutorials - RennTech.org Forums Stabilizer to side member MI0 x 1.5 65 (48) Stabilizer mount to stabiliser MI0 46 (34) Stabiliser mount to shock absorber pipe and wheel carrier - 911 Carrera 2M12 x 1.5 85 (63) Stabiliser mount to spring strut MI0 46 (34) Rear Strut removal: 1. Climb in the back seat of the car remove the panel behind the rear seat. It has no clips. 2. Mark the location of the three (3) 15mm bolts on the top of the trunk that holds the strut to the body with a ink pen. 3. Loosen lug nuts slightly and block front wheels. 4. Lift rear of car from cross member bar under motor and put jack stands in rear jack points. (***Make sure you have a low profile jack so that after you install the struts and you go to let it down it will fit under the engine. To help with this I approached the cross member bar from a 45 degree angle near the rear portion of the wheel well.) http://www.renntech.org/forums/tutorials/article/88-row-m030-sport-suspension-install/?forcePrint=1&_k=893ccccbb84b100141dbbbe5e95342e1 6/12