& Warning! · During body repairs, the following safety instructions and the general information and quality instruc-

911 Carrera (996) Body front & Warning! During body repairs, the following safety instructions and the general information and quality instruc- tions must be followed. => Rep. Gr. 5; ~)afety instructions rn Note! .The accessories in the repair area should be removed,dependingon the extent of the damage. .All straighteningwork on the body in this area must have been completed before the damaged parts are removed. No. Procedure Instructions Placingvehicle on the alignmentbench Placethe vehicle with the units mounted at the rear onto the set of straighteningattachments and fasten it in posi- tion. Closing panel and front floor panel already => 50-11 "Replacingclosing panel" cut out Frontwall already cut out => 50-33 "Replacingfront wall" 1 Removingthe wheel housings Cut off the damaged areas of the wheel housings -8- with the body saw. Positionthe cut within the specified dimension of -Y = 580 mm-. 2 Cutting off inner side member Note: Do not cut through the inner reinforcements-arrow- when cutting through the inner side members. Removethe damaged areas of the outer/inner side mem- bers -F- with the body saw. Positionthe cut -Y-within the specified dimension of -580 mm-. 3 Cutting off outer side members and shorten- Do not cut through the inner reinforcements-arrow- when ing to the offset to the wheel housings cutting through the outer side members. Positionthe cut within the specified dimension of -Y = 580 mm-. Use the body saw and spotweld cutter to shorten the side members until there is an offset of -dimension X = 50 mm- betweenthe inner/outer side members and the wheel housing. Downloaded from www.Manualslib.com manuals search engine