Porsche 997.2 Turbo — Oil Change Guide / PAGE 3
8. Loosen oil filter cover with AF36 (or equivalent) tool. · 9. Remove filter cover, remove gasket, pull out filter element.
Read extracted page text
OCR can contain errors. Check the original page image for exact wording, warnings and specifications.
8. Loosen oil filter cover with AF36 (or equivalent) tool.
9. Remove filter cover, remove gasket, pull out filter element.
10. Fit new gasket, replace new filter element.
11. Replace filter and screw cover onto oil filter housing.
12. Hand tighten cover, then torque to 19 ft/lb.
13. Add engine oil, 7.4L for oil change, 10.4L for engine rebuild/new engine. Leave about a quart to
add as needed after checking level.
14. Bring engine up to temperature, approx.. 140F/60C.
15. Select OIL with operating lever.
16. Add oil in increments until it is in the center section of the indicator:
RennKit © RennKit LLC | All rights reserved Page 3 Porsche 996 Turbo eRam Kit
This is a source reference. Confirm exact model applicability in the original material.