Cleaning rear water drains on Coupe and Cabriolet · Removing side-panellining,see ServoNo. 70 75; removing rear wheel housingliner

911 Carrera (996) Body Cleaning rear water drains on Coupe and Cabriolet Removing side-panellining,see ServoNo. 70 75; removing rear wheel housingliner, see ServoNo. 5369 Warning! Water drainage hoses can be pushed out or pressed in when blown out of the body! & > The water drains of the Coupe and Cabrioletshould be blown out carefully with compressed air. No. Procedure Instructions 1 Blowoutthe Cabrioletwater Carefullyblowout the water drain tube (arrow A) draintube in the rear wheel in the water collection tray on the left and right. housingson the left and Remove any dirt particles from the water collection right. tray (arrow B) using the vacuum cleaner. Installing side-panellining,see ServoNo. 70 75 2 Blowout the water Note: drainage hoses from the The water drainage hoses should only be blown out when sliding/tilting roof at the the sliding/tilting roof is closed. front, rear I left and right. Front water drainage hose: Carefullyblowout the front water drainage hose in the B-pillar (arrow A) on the left and right. Rear water drainage hose: Put vehicle onto lifting platform and carefully blowout the water drain (arrow A) on the left and right in the rear wheel housingfrom the outside of the wheel arch Open sliding/tilting roof and remove dirt particles from the sliding roof frame using the vaclilumcleaner. Installingrear wheel housing liner, see ServoNo. 5369 53 93 30 Cleaning rear water drains on Coupe and Cabriolet 53-7 Printed in Germany -23, 1999 996535 Downloaded from www.Manualslib.com manuals search engine .