No. Procedure Instructions · Plug-weldingreinforcement/sidemember at Plug-weldthe reinforceme

911 Carrera (996) Body rear No. Procedure Instructions Plug-weldingreinforcement/sidemember at Plug-weldthe reinforcementbetw en the side members at bottom under shielding gas bottom -E- and the closing panel nder shieldinggas. 2 Spot-weldingthe rear closing panel/side Spot-weldthe connectionbetwee the inner side members member on the inside -8, C- and the rear closing panel on the left and right. 3 Plug-weldingthe engine mount/side mem- Plug-weldthe engine mounts at t e left and right to the ber at top under shielding gas side member at top -D- under shi Iding gas. Plug-weldthe connection -F- to t e inner side section with an approx.l 0 mm full weld. 4 Spot-weldingthe closingpanel/sidemem- Plug-weldthe connectionbetwee the inner side members berson the inside -A- and the closing panel under s ielding gas. Tools and materials Item Designationof the special tool Basic straighteningattachmentsfor 911 Carrera (996) =>Rep. Gr. 3;1Workshop Equipment Manual I 2 Additionalstraighteningattachmentsfor 996 Turbo =>Rep. Gr. 3; Workshop Equipment Manual 3 Star gaugesNr. 127-1 => Rep. Gr. 2.4; Workshop Equipment Manual 4 MIGwelder => Rep. Gr. 3; Workshop Equipment Manual 5 Multispot spotwelder => Rep. Gr. 3; Workshop Equipment Manual 6 Pneumaticbody saw => Rep. Gr. 3; Workshop Equipment Manual 7 Anglegrinder => Rep. Gr. 3; Workshop Equipment Manual 8 Oscillatingbody saw (special electrical cutter) =>Rep. Gr. 3; Workshop Equipment Manual 9 Multispotspotweld cutter => Rep. Gr. 3; Workshop Equipment Manual 10 Holepunch => Rep.Gr. 2 4; Workshop Equipment Manual Hot-airgun => Rep. Gr. 3 Workshop Equipment Manual 12 Rotarybrush => Rep. Gr. 3 Workshop Equipment Manual 530555 Replacing rear closing panel -GT 3 53-39 page 7 Printed in Germany -44,2001 e5305552 Downloaded11 from www.Manualslib.com manuals search engine