DME 7.8 DME 7.80 · 0 0 0 0 0 0 1 0

DME 7.8 DME 7.80 0 0 0 0 0 0 1 0 7 6 5 4 3 2 1 0 Bit Bit 0 Open-loop control; the conditions for oxygen sensing are not yet fulfilled. Bit 1 Closed-loop control; the signal from the oxygen sen- sor is used to control injection. Bit 2 Open-loop control through conditions such as full load, etc. Bit 3 Open-loop control due to fault in system. Bit 4 Closed-loop control, but faults from at least one oxy- gen sensor. Bits 5 to 7 not used. Note! Only one bit at a time can be set to 1 to indicate the status. $04 Calculated load value Output of calculated load as a percentage of the maximum load. Display between 0% and 100%. In the case of decimal output, conversion factor = 0.3921568 The decimal value displayed multiplied by 0.3921568 gives the load as a percentage. $05 Engine coolant temperature Output of the momentary engine coolant temperature. Display between -40 °C and 215 °C. In the case of decimal output, conversion factor = 1 Offset = -40 °C Decimal value displayed multiplied by 1 minus 40 °C gives the cool- ant temperature. $06 HO2S integrator, bank 1 Output of the control value FR of the oxygen sensor closed-loop con- trol, bank 1. 0-3.1 page 6 Data output with a scan tool - 911 Carrera (996) dsc_FL78 Printed in Germany – 8, 2002