DME 7.8 DME 7.80 · $0D Vehicle speed

DME 7.8 DME 7.80 $0D Vehicle speed Output of the speed. In the case of decimal output, conversion factor = 1 Mode 3 Output of stored faults. The Diagnostic Trouble Codes of all shedded, officially relevant* faults are displayed in Mode 3. * Faults which switch on the Check Engine warning light Mode 4 In Mode 4, the fault memory can be erased. Note! ♦The fault memories of all systems relevant to OBD are erased. ♦If the fault memory is erased, Mode 5 and Mode 6 values are also reset. Furthermore, the adaptation values are neutralised. Mode 5 Output of oxygen sensor data. The values of the last oxygen sensor test carried out (test identifica- tion TID) can be read out for every oxygen sensor with its nominal values. $01 Rich-lean threshold voltage Programmed fixed value: e.g. 0.430 V. In the case of decimal output, conversion factor = 0.005 Decimal value displayed multiplied by 0.005 gives the threshold voltage. $02 Lean-rich threshold voltage Programmed fixed value: e.g. 0.430 V. In the case of decimal output, conversion factor = 0.005 Decimal value displayed multiplied by 0.005 gives the threshold voltage. 0-3.1 page 16 Data output with a scan tool - 911 Carrera (996) dsc_FL78 Printed in Germany – 8, 2002