DME 7.8 DME 7.80 · $31 Shift in oxygen sensor characteristic towards lean

DME 7.8 DME 7.80 $31 Shift in oxygen sensor characteristic towards lean Minimum: e.g. 0.00 s Maximum: e.g. 1.20 s Test value: e.g. 0.00 s In the case of decimal output, conversion factor = 0.04 Decimal value displayed multiplied by 0.04 gives the time. $32 Averaged period Minimum: e.g. 0.00 s Maximum: e.g. 3.00 s Test value: e.g. 0.40 s In the case of decimal output, conversion factor = 0.04 Decimal value displayed multiplied by 0.04 gives the time. Mode 6 The test results of components or systems which are not continu- ously monitored are output in mode 6. At the same time, limit values are provided. The test results are referred to as TIDs (Test Identifi- cation). The components or systems are distinguished by CIDs (Component Identification). The following components or systems are supported: TID $01 Catalytic converter monitoring The catalytic converters (bank 1/bank 2) are monitored individually and for the sum of the emissions. There are two threshold values for individual monitoring: ♦AHKATMN for the OK detection and ♦AHKATMX for the defect detection. For the sum of the emissions, there is the AHKATSB threshold value. A number (ahkat) which is between 0 and 1 is used as a measure for the aging of the catalytic converters. 0 - good 0-3.1 page 18 Data output with a scan tool - 911 Carrera (996) dsc_FL78 Printed in Germany – 8, 2002