DME 7.8 DME 7.80 · The values displayed can be multiplied by the factor 0.0039 to find

DME 7.8 DME 7.80 The values displayed can be multiplied by the factor 0.0039 to find the ahkat or AHKATMX values. $09 Checksum range error, bank 2 DTC P0430 in memory. The values displayed can be multiplied by the factor 0.0039 to find the ahkat or AHKATMX values. $0A Conversion, bank 1 The values displayed can be multiplied by the factor 0.0039 to find the ahkat or AHKATMX values. $0B Conversion, bank 2 The values displayed can be multiplied by the factor 0.0039 to find the ahkat or AHKATMX values. Note! CID $0A and $0B are displayed if the function was carried out with the Porsche System Tester 2 in the Short test menu. TID $03 Secondary air system The following CIDs can be displayed: $00 Test not yet carried out $01 Secondary air system, bank 1 Relative secondary air mass $04 Secondary air system, bank 2 Relative secondary air mass Note! ♦The relative secondary air mass is the measured secondary air mass relative to the expected nominal value (optimal value) in this operating point. The optimal value is detected with a fault- less system. The nominal value is primarily dependent on exhaust backpressure, geographical altitude and voltage supply. ♦A fault is present if the relative secondary air mass does not exceed the diagnosis threshold value. ♦The values displayed can be multiplied by the factor 0.0078 to find the applied values. 0-3.1 page 20 Data output with a scan tool - 911 Carrera (996) dsc_FL78 Printed in Germany – 8, 2002