Disassembling release for rear lid · No. Procedure Instructions

911 Carrera (996) Lids, flaps Disassembling release for rear lid No. Procedure Instructions 1 Undo hexagon socket head bolts. Removeplastic plugs and undo the M6 x 25 hexagon socket head bolts from the sill by approx. 4 to 5 turns. 2 Removesill cover. Lift sill cover upwards out of the bott~m support with a plastic spatula and press out. t, 3 Undobowdencables. Undo the M4 x 14 hexagon socket head bolt of the bawden cable in the actuating lever. Press the bowden cable sleeve out of the guide of the sill cover. 4 Undoactuatinglevers. Press retainer SLB 6 out of the 6 x 22 x 19 pin. Remove pin from the actuating lever and from the sill cover. Disengagespring from the sill cover and pull the actuating lever up and out of the sill cover. 5 Undoactuatingelement. Undo Torx screws from the actuating element and pull out of the support to the rear; disconnectelectrical connection. 55 57 37 Disassembling and assembling release for rear lid 55 -19 Printed in Germany, 1997 996559 Downloaded from www.Manualslib.com manuals search engine