Assembling release for rear lid · No. Procedure Instructions

911 Carrera (996) Lids, flaps Assembling release for rear lid No. Procedure Instructions 1 Fit actuating element. Insert the actuating elementfor lid release into the support from behind and position. Then fasten with the T20 x 15 Torx screws. Connectelectrical plug connection. Plug in the electrical plug connection. 2 Fit actuating levers. Position actuating lever in the sill cover, press in 6 x 22 x 19 pin and secure with the retainer SLB 6. Engagethe tension spring 0.8 x 5.2 ~ 30 in the sill cover and engage the actuatinglever. i 3 Fit bowdencables. Position bowden cable in the actuating lever and fasten with the M4 x 14 hexagon socket head bolt. Press the bowden cable sleeve into the guide of the sill cover. 4 Check plastic Check plastic clips in the sill cover amdreplace them if clips. necessary. I 5 Screwin hexagonsockethead The M6 x 25 hexagon socket head bolts in the support bolts. must not be screwed in by more than 3 to 4 turns. 6 Fit sill cover. Positionthe sill cover on the support and push it onto the support. t"', 7 Tightenhexagonsockethead Tighten the M6 x 25 hexagon socket head bolts in the bolts. support through the holes in the sill cover. Press in the 8.0 x 11 x 7.2 plugs. 55 57 37 Disassembling and assembling release for rear lid 55 -21 Printed in Germany. 1997 996559 Downloaded from www.Manualslib.com manuals search engine