DME 7.8 DME 7.8 0 · 0-8.7P0022

DME 7.8 DME 7.8 0 0-8.7P0022 Position of Camshaft in Relation to Crankshaft, Bank 2 – Above Limit Diagnosis conditions • Idle speed • Reference mark recognized • Engine speed between 600 rpm and 1200 rpm. • Engine temperature greater than 40 °C • No fault in camshaft position sensors • No fault with reference mark • No fault in camshaft adjustment • No fault in engine temperature • No fault in camshaft adjustment output stage Possible fault cause ♦Solenoid hydraulic valve camshaft adjustment faulty ♦Allocation of camshaft to inlet camshaft incorrect Affected terminals - Diagnosis/Troubleshooting Work instruction Display OK If not OK 1 Check solenoid hydraulic ♦Remove connector on solenoid See Figure 2 Replace solenoid valve camshaft adjust- hydraulic valve Step 2 hydraulic valve ment →End ♦Connect special tool 9675 to the solenoid hydraulic valve and to a power supply. ♦Connect oscilloscope or engine tester to the special tool 9675 ♦Set 12 V ♦See Figure 1. ♦Set switch on special tool 9675 to 1 1536 P0022 0-8.7 page 1 Printed in Germany – 6, 2002 p0022