Porsche DME 7.8 — OBD II Diagnosis Manual / PAGE 173
DME 7.8 DME 7.8 0 · Diagnosis/troubleshooting
Read extracted page text
OCR can contain errors. Check the original page image for exact wording, warnings and specifications.
DME 7.8 DME 7.8 0
Diagnosis/troubleshooting
Note!
The wiring for the solenoid hydraulic valve is routed via the connector X 59/2 pin 8
Work instruction Display OK If not OK
1 Check triggering wire for ♦Connect special tool 9637 to 0 V Repair wiring har-
short circuit to B+ wiring harness (DME control ness
module plug).
♦Remove connector on the sole-
noid hydraulic valve
♦Switch on the ignition.
♦Measure voltage between III/1
and ground
3755 P0026 0-8.9 page 3
Printed in Germany – 8, 2002 p0026
This is a source reference. Confirm exact model applicability in the original material.