Porsche DME 7.8 — OBD II Diagnosis Manual / PAGE 197
DME 7.8 DME 7.8 0 · 0-8.17P0045
Read extracted page text
OCR can contain errors. Check the original page image for exact wording, warnings and specifications.
DME 7.8 DME 7.8 0
0-8.17P0045
Charge Pressure Control Valve Output Stage - Open
Circuit
Diagnosis conditions
• Ignition on
Possible fault cause
♦Charge pressure control valve (coil) open circuit
♦Open circuit in wiring
Affected terminals
III/4
Diagnosis/Troubleshooting
Work instruction Display OK If not OK
1 Check charge pressure ♦Measure resistance at the 20 - 26 Ω at 20 °C.
control valve. charge pressure control valve.
2 Check wiring harness for ♦Connect special tool to wiring 0 - 5 Ω Repair wiring har-
open circuit. harness (DME control module ness
plug). → End.
♦Remove connector of charge
pressure control valve.
♦Measure resistance between
special tool 9637 pin III/4 and
charge pressure control valve
plug pin 2.
2193 P0045 0-8.17 page 1
Printed in Germany – 6, 2002 p0045
This is a source reference. Confirm exact model applicability in the original material.