No, Procedure Instructions · Engagingthe door up to model year 2000 Engagethe door in the d

911 Carrera (996) Doorfront,centrallockingsystem No, Procedure Instructions Engagingthe door up to model year 2000 Engagethe door in the door hinge~from above and screw in the locking screw. Note: the locking screw is microen apsulatedand must be replaced every time it is unscrewe . Tighteningtorque -10 Nm (7.5 ft!b.)- 2 Engagingthe door as of model year 2001 Engagedoor in door hinge from a~ove, screw in locking screw and tighten with -13 Nm (~.5 ftlb.)-. Note: the locking screw is microen~apsulatedand must be replaced every time it is Use special tool => No. 9666; Re .Gr. 2.4; (angle screw- driver)to counter. unscrewel 3 Fittingdoor brake Screwthe door brake to the body ith the fastening screw. Tighteningtorque: -23 Nm (17 ft~b.)- 4 Connectingelectrical plug connection Connectelectrical plug connectio . Attention: locking tabs in the plug an break off! Press in the securing latch of the lug connection -B-. Pushthe whole plug connection in 0 the A-pillar.Press the plug down approx. 3 mm, so that he locking tab -C- engagesin the retaining bracket. hen screw the Torx fas- tening screw T20 -A- tight. Tighteningtorque: -2.5 Nm (2.0 ftlb.)- 575119 Removing and installing door 57-1 page 5 Printed in Germany -44,2001 c5751191 Downloaded from www.Manualslib.com manuals search engine