fullymatted.
Back to search
Porsche DME 7.8 — OBD II Diagnosis Manual / PAGE 409

DME 7.8 DME 7.8 0 · 1 - Replace VarioCam.

Add to repair workspace
Open repair workspace
Open full manual Original source
Original manual page 409
Read extracted page text

OCR can contain errors. Check the original page image for exact wording, warnings and specifications.

DME 7.8 DME 7.8 0 1 - Replace VarioCam. 2 - Road test vehicle. Other possible fault causes ♦worn camshafts ♦leaking valves ♦faulty piston rings If opposing cylinders have misfiring, the cause could be the sensor wheel. If valve lift faults are suspected, perform the system test for large lift and the system test for small lift with the Porsche System Tester 2. Note! If the battery was disconnected, at least range 1 of sensor wheel adaptation must be adapted before troubleshooting is carried out; see actual values explanation. Affected terminals - Diagnosis/Troubleshooting Note! If there is a lot of oil in the engine, check that the oil filler tube and cap are tight. Work instruction Display OK If not OK 1 Check for air leaks in intake air system Step 2. Repair intake air system → End. 2 Carry out pressure loss test Step 3. Repair engine → End 3 Check spark plugs. Step 4. Replace faulty spark Specified spark plugs: plug(s). Electrode gap: 1.6 mm ± 0.2 mm. → End Check appearance of spark plugs 4 Check spark plug connectors Approx. 2 kΩ Replace faulty spark Step 5 plug connectors. → End 2470 P0300 0-43 page 3 Printed in Germany – 4, 2002 p0300

This is a source reference. Confirm exact model applicability in the original material.