Porsche DME 7.8 — OBD II Diagnosis Manual / PAGE 419
DME 7.8 DME 7.8 0 · 1 - Replace VarioCam.
Read extracted page text
OCR can contain errors. Check the original page image for exact wording, warnings and specifications.
DME 7.8 DME 7.8 0
1 - Replace VarioCam.
2 - Road test vehicle.
Other possible fault causes
♦worn camshafts
♦leaking valves
♦faulty piston rings
If opposing cylinders have misfiring, the cause could be the sensor
wheel.
If valve lift faults are suspected, perform the system test for large
lift and the system test for small lift with the Porsche System Tester
2.
Note!
If the battery was disconnected, at least range 1 of sensor wheel
adaptation must be adapted before troubleshooting is carried out;
see actual values explanation.
Affected terminals
-
Diagnosis/Troubleshooting
Note!
If there is a lot of oil in the engine, check that the oil filler tube and
cap are tight.
Work instruction Display OK If not OK
1 Check for air leaks in intake air system Step 2. Repair intake air
system
→ End.
2 Carry out pressure loss test Step 3. Repair engine
→ End
3 Check spark plugs. Step 4. Replace faulty spark
Specified spark plugs: plug(s).
Electrode gap: 1.6 mm ± 0.2 mm. → End
Check appearance of spark plugs
4 Check spark plug connectors Approx. 2 kΩ Replace faulty spark
Step 5 plug connectors.
→ End
2470 P0301 0-44 page 3
Printed in Germany – 4, 2002 p0301
This is a source reference. Confirm exact model applicability in the original material.
