13 -Remove wiring harness ... · 1. Unclip the electrical wiri

911 Carrera (996) Door front, central locking system 57 13 -Remove wiring harness ... 1. Unclip the electrical wiring along the inner door panel. 2. Pull wiring harness out of the door in the -direction of "11(' the arrow-. \ 14 -Remove angle piece -Unscrew T 45 M8 x 33 Torx screw from the angle piece and the 12 x 8 x 7 centring sleeve. Assembling door Danger of injury if side airbag units in the door are triggered while ignition key is not removed! .Always remove ignition key during body work, and do not commence adjustment work until a waiting period of at least 1 minute has elapsed! .The ground strap of the battery must be disconnected during work on the airbag system and alignment bench work within the framework of body repair! [IJ Note! Follow the special instructions on installation and adjustmentfor assembly of the door! 575137 Disassembling and assembling door 57-5 page 7 Printed in Germany-44, 2001 c5751371 Downloaded~ from www.Manualslib.com manuals search engine