Adjusting the door window angle in The upper limit stops of the drivers are adjusted · the vehicle's longitudinal dir

911 Carrera (996) Door front, central locking system Adjusting the door window angle in The upper limit stops of the drivers are adjusted the vehicle's longitudinal direction in or against the direction of travel by screwing the Torx screw T30 in or out with socket E6 (adjusting range approx. 115mm). Adjust the drivers so that they meet the upper limit stops at the same time. The adjusting screws of the drivers for the upper limit st~ps for the door window height are accessiblt through 2 holes at the bottom of the door. Adjustment procedure: Open the door; lock the door lock with a screwdniver. Move power windowheight at unitthe to driverstop position;so that f hedjust door door window window evenly projects approx. 2 m above the roof 230_96 strip. Checking the adjustment Adjusting the clamping jaw at the driver upwards or downwards (adjusting range 10 mm) equalisesthe angle of the door window. Tighten the clamping jaw after completing the adjustment. ':: --- Adjusting the door window height ,/(' /, ~ 489_97 Close the door and use a wa~ marker to mark Actuatethe doorthewindowdoor alonghandletheuntilr~Ofthestrip.window lowering function (approx. 1 mm) is activated. 231_96 The wax marking along the oor window should be uniformlyapprox. 4 mm~ 57 51 37 Disassembling and assembling door (adjustment instructions) 57 -19 Printed in Germany -21, 1999 9965717 Downloaded from www.Manualslib.com manuals search engine J6