DME 7.8 DME 7.8 0 · 0-P0715P0715

DME 7.8 DME 7.8 0 0-P0715P0715 Tiptronic (Supply voltage of speed sensors) Diagnostic conditions • Ignition on Possible cause of fault ♦The Tiptronic control unit has detected a malfunction. Note! ♦The fault is diagnosed in the Tiptronic control unit. OBDII relevant fault codes are sent to the DME control module via the CAN drive. In the process the Tiptronic fault codes are converted to P-code! ♦Fault management and any activation of the Check Engine lamp is done by the DME control module! Affected terminals - Diagnosis/troubleshooting Note! ♦The fault codes stored in the Tiptronic control unit for this P code are to be taken from the following table. ♦For in-depth troubleshooting see Rep. Gr. 3701; Tiptronic diagnosis in the On-Board Diagnosis Manual (OBD II), Tiptronic, Boxster (986), 911 Carrera (996), 911 Turbo (996) P code Fault code Fault text Fault effect P0715 11 Supply voltage of speed sensors (out- Control unit in limp-home mode, mini- side tolerance) mum cycle initiated 12 Speed sensor n2 (or sensor supply Control unit in limp-home mode interrupted) 13 Speed sensor n3 Control unit in limp-home mode 14 Speed comparison n2 with n3 implausi- Control unit in limp-home mode ble 2470 P0715 0-P0715 page 1 Printed in Germany – 14, 2003 p0715