DME 7.8 DME 7.8 0 · 0-P0720P0720

DME 7.8 DME 7.8 0 0-P0720P0720 Tiptronic (CAN: wheel speed rear right) Diagnostic conditions • Ignition on Possible cause of fault ♦The Tiptronic control unit has detected a malfunction. Note! ♦The fault is diagnosed in the Tiptronic control unit. OBDII relevant fault codes are sent to the DME control module via the CAN drive. In the process the Tiptronic fault codes are converted to P-code! ♦Fault management and any activation of the Check Engine lamp is done by the DME control module! Affected terminals - Diagnosis/troubleshooting Note! ♦The fault codes stored in the Tiptronic control unit for this P code are to be taken from the following table. ♦For in-depth troubleshooting see Rep. Gr. 3701; Tiptronic diagnosis in the On-Board Diagnosis Manual (OBD II), Tiptronic, Boxster (986), 911 Carrera (996), 911 Turbo (996) P code Fault code Fault text Fault effect P0720 22 CAN: wheel speed rear right from PSM Substitute value wheel speed rear left; implausible if more than one fault from Group 22, 23, 24, 25 appears, then control unit is in limp-home mode 23 CAN: wheel speed rear left from PSM Substitute value wheel speed rear left; implausible if more than one fault from Group 22, 23, 24, 25 appears, then control unit is in limp-home mode 38 CAN: PSM communication disturbed Control unit in limp-home mode 2470 P0720 0-P0720 page 1 Printed in Germany – 14, 2003 p0720