996 Carrera Group 1 – Part 1 Engine / PAGE 13
Intermediateshaftflange · to crankcase M6 (micro-encaps. 10 (7.5)
Read extracted page text
OCR can contain errors. Check the original page image for exact wording, warnings and specifications.
Intermediateshaftflange
to crankcase M6 (micro-encaps. 10 (7.5)
Lock nut on intermediate
shaft flange M8 xl 13 (10.0) or 11 (8.0) if
special tool 9110 is used
Screw plug for piston pin
assembly bore on cylinder
bank 4 -6 M27x 2 80 (59)
Engine carrier to engine MID 46 (34)
Bolt for guide rail M6 10 (7.5)
Pulleyto
crankshaft M16 x 15
Initial tightening: 50 (37)
Finaltightening: 1 x 900 turn
Double-massflywheel to
crankshaft MI0 x 1 x 50 (12.9)
Initial tightening: 25 (19)
Finaltightening: 1 x 900 turn
Thrust plate to double-mass
flywheel M8 23 (17)
Drive plate on crankshaft
(Tiptronic) MIa x 1 x 25 (12.9)
Initial tightening: 25 (19)
Final tightening: 1 x 900 turn
Water pump to
crankcase M6 10 (7.5)
Chain tensioner to
crankcase M27 x 2 80 (59)
Belt tensioner roller on
lever for tensioning element MID 60 (44)
1 -2 1 Tightening torques for engine M96jOl
9961_1 Printed in Germany -23, 1999
This is a source reference. Confirm exact model applicability in the original material.