fullymatted.
Back to search
Porsche DME 7.8 — OBD II Diagnosis Manual / PAGE 907

DME 7.8 DME 7.80 · Perform system test for large lift

Add to repair workspace
Open repair workspace
Open full manual Original source
Original manual page 907
Read extracted page text

OCR can contain errors. Check the original page image for exact wording, warnings and specifications.

DME 7.8 DME 7.80 Perform system test for large lift Warning! Test is carried out while driving. Have a second person oper- ate the Porsche System Tester 2. 1 - Select system test. 2 - Select "Request large lift". If "Valve lift diagnosis not ready" appears, a fault may have been stored. In this case, delete the fault memory. The engine must be at operating temperature. 1. Carry out acceleration with wide-open throttle in 2nd gear up to 7,000 rpm. Test in manual range for Tiptronic vehi- cles After 3,000 ignitions the Tester indicates whether a fault is present or not. In order to ensure that the fault is repaired, the flat-base tappets of the inlet valves of the entire cylinder bank should be replaced if a fault occurs. 0-156.1 page 2 1555 P1350 - 911 Carrera p1350a Printed in Germany – 8, 2002

This is a source reference. Confirm exact model applicability in the original material.