DME 7.8 DME 7.8 0 · 0-172P1502

DME 7.8 DME 7.8 0 0-172P1502 412 Throttle jacking unit, spring test - above limit Diagnosis conditions • Ignition on (approx. 30 sec.) • Stationary vehicle • Engine not running • Engine temperature greater than 5 °C • Intake air temperature greater than 5 °C Possible fault cause ♦Throttle part Affected terminals - Diagnosis/troubleshooting Work instruction Display OK If not OK 1 Replace throttle part ⇒ Step 2 2 Erase fault memory ⇒ Step 3 3 Perform adaptation ♦Switch on the ignition → End → End ♦Wait one minute ♦Actuate accelerator pedal ♦Switch off the ignition for at least 10 seconds ♦Read out the fault memory 2442 P1502 0-172 page 1 Printed in Germany, 2000 p1502