Porsche DME 7.8 — OBD II Diagnosis Manual / PAGE 1103
DME 7.8 DME 7.8 0 · 0-198.2P1659
Read extracted page text
OCR can contain errors. Check the original page image for exact wording, warnings and specifications.
DME 7.8 DME 7.8 0
0-198.2P1659
Overrun Recirculating Air Valve Output Stage - Below
Limit
Diagnosis conditions
• Engine running
• Battery positive voltage greater than 7 V
Possible fault cause
♦Short to ground triggering wire
Affected terminals
III/16
Diagnosis/Troubleshooting
Note!
The wiring for the overrun recirculating air valve is routed via the connector X 59/3 pin 8.
Work instruction Display OK If not OK
1 Check triggering wire for ♦Connect special tool 9637 to ∞ Ω Repair wiring har-
short to ground. wiring harness (DME control ness.
module plug).
♦Remove plug connection of
overrun recirculating air valve.
♦Measure resistance between III/
16 and ground.
2138 P1659 0-198.2 page 1
Printed in Germany – 6, 2002 p1659
This is a source reference. Confirm exact model applicability in the original material.