Porsche DME 7.8 — OBD II Diagnosis Manual / PAGE 1125
DME 7.8 DME 7.8 0 · 0-201.5P2092
Read extracted page text
OCR can contain errors. Check the original page image for exact wording, warnings and specifications.
DME 7.8 DME 7.8 0
0-201.5P2092
Inlet camshaft output stage, bank 2 - below limit
Diagnosis conditions
• Engine running
Possible fault cause
♦Triggering wire short to ground
♦Solenoid hydraulic valve faulty
Affected terminals
V/8
Diagnosis/troubleshooting
Work instruction Display OK If not OK
1 Check triggering wire for ♦Connect special tool 9637 to ∞ Ω
short to ground wiring harness (DME control
module plug)
♦Remove connector on the sole-
noid hydraulic valve
♦Measure resistance between V/
8 and ground
2 Replace solenoid hydrau-
lic valve
1536 P2092 0-201.5 page 1
Printed in Germany – 8, 2002 p2092
This is a source reference. Confirm exact model applicability in the original material.