Porsche DME 7.8 — OBD II Diagnosis Manual / PAGE 1127
DME 7.8 DME 7.8 0 · 0-201.6P2093
Read extracted page text
OCR can contain errors. Check the original page image for exact wording, warnings and specifications.
DME 7.8 DME 7.8 0
0-201.6P2093
Inlet camshaft output stage, bank 2 - above limit
Diagnosis conditions
• Engine running
Possible fault cause
♦Triggering wire short to B+
Affected terminals
V/8
Diagnosis/troubleshooting
Work instruction Display OK If not OK
1 Check triggering wire for ♦Connect special tool 9637 to 0 V Repair wiring har-
short circuit to B+ wiring harness (DME control ness
module plug)
♦Remove connector on the sole-
noid hydraulic valve
♦Switch on the ignition
♦Measure voltage between V/8
and ground
1536 P2093 0-201.6 page 1
Printed in Germany – 8, 2002 p2093
This is a source reference. Confirm exact model applicability in the original material.