Wrap the connector and wire in padded electrical tape or similar to prevent rattling when stowed away in · the recess under the Tu

RennKit Wrap the connector and wire in padded electrical tape or similar to prevent rattling when stowed away in the recess under the Turbo cowl panel. Installation of the Turbo cowl panel (without 3rd brake light) is the reverse process. It is possible to adjust the gaps on the panel, both horizontally and vertically. Install it firmly enough to hold in place, but as close to the back window as it will go so it doesn't risk colliding with the new deck lid once installed. The gaps can be adjusted later - once the new deck lid is mounted. The screws are harder to get to but are reachable. Be careful to protect the surrounding area when doing the final adjustment and tightening since there is limited access to the Torx bolts. 14