Porsche 996 / 986 — PCCM Plus Installation (56/20) / PAGE 7
Technical Information · 56/20 ENU 9112 9
Read extracted page text
OCR can contain errors. Check the original page image for exact wording, warnings and specifications.
911 (996)
Technical Information
56/20 ENU 9112 9
5 Installing device
5.1 On vehicles with M662 up to model year
2002, the alarm contact Figure 11 -1- on
the retaining frame must be insulated.
Figure 11
5.2 Secure the side panel at the left and right
Figure 12 -3- to the transverse strut Figure
2 -2- using two screws on each side Figure
12 -1-.Install Figure 2 -2-.
Figure 12
5.3 Insert device Figure 13 -2- into Z retaining
bracket Figure 13 -1- and install the side
panels with transverse strut on the device
from the rear. Check that the device is
installed securely. Screw the device to the Z
retaining bracket with four screws.
Figure 13
AfterSales AugPage31,7 2020of 12
This is a source reference. Confirm exact model applicability in the original material.