Porsche — Front / Rear Axle Trailing Arm Specifications (44/17) / PAGE 7
Technical Information · 44/17 ENU 4017 4
Read extracted page text
OCR can contain errors. Check the original page image for exact wording, warnings and specifications.
Service
Technical Information
44/17 ENU 4017 4
996.341.043.06 (and older) or 996.347.053.17 (and older), both trailing arms and both
longitudinal arms must be replaced on both sides of axle.
Important Notice: Technical Bulletins issued by Porsche Cars North America, Inc. are intended only for use by professional automotive technicians who have attended Porsche service training
courses. They are written to inform those technicians of conditions that may occur on some Porsche vehicles, or to provide information that could assist in the proper servicing of a vehicle. Porsche special
tools may be necessary in order to perform certain operations identified in these bulletins. Use of tools and procedures other than those Porsche recommends in these bulletins may be detrimental to the
safe operation of your vehicle, and may endanger the people working on it. Properly trained Porsche technicians have the equipment, tools, safety instructions, and know-how to do the job properly and
safely. Part numbers listed in these bulletins are for reference only. The work procedures updated electronically in the Porsche PIWIS diagnostic and testing device take precedence and, in the event of a
discrepancy, the work procedures in the PIWIS Tester are the ones that must be followed.
© 2020 Porsche Cars North America, Inc.
AfterSales MarPage13,7 2020of 7
This is a source reference. Confirm exact model applicability in the original material.
