996 Carrera Group 1 – Part 1 Engine / PAGE 72
58. Loosen belt pulley. Undo hexagon-headbolt 60. Undo intermediate shaft flange. · (M16 x 1.5 x 60) with special tool 9594
Read extracted page text
OCR can contain errors. Check the original page image for exact wording, warnings and specifications.
58. Loosen belt pulley. Undo hexagon-headbolt 60. Undo intermediate shaft flange.
(M16 x 1.5 x 60) with special tool 9594 Unscrewthe three fastening screws M6 x 20
(socket wrench insert), and hold with special on the intermediate-shaftflange. Undo the
tool 9593 (retaining device) at the same time. lock nut with the special tool 9110 (socket
wrench insert) and hold with a screwdriver
7.0 x 1.1 at the slotted threaded pin at
the same time.
I I:JJ
/.~
--:-
8
252_97
59. Turn primary chain tensioner out of
the crankcase (cylinder bank 4 -6). 44~97
"I Ring"identification
61. Removecoolant guide housingwith oil
pump. Pull hexagonoil pump driver out
of intermediate-shaftflange.
4l.L ~ .ij;;J 0
= , I
'9J::}
r::::i
N
62_98
597_97
10 -44 10 01 37 Disassembling and assembling engine
9961033 Printed in Germany -19, 1998
This is a source reference. Confirm exact model applicability in the original material.