Engine -Crankcase, suspension 911 Carrera (996) · 69. For the following disassemblyprocedure,

Engine -Crankcase, suspension 911 Carrera (996) 69. For the following disassemblyprocedure, the crankcase half and bearing housing unit must be held by at least two screwed connectionsfor safety reasons. For this purpose, fasten two original cylinder head screws and plastic spacer sleeves, special tool 9613, from below. Tighteningtorque approx. 20 Nm (15 ftlb.). Use Torx screwdriver insert T50 or T55. 71. Remove pistons with connecting rods on cylinder bank 1 -3. Mark pistons. Unscrew connecting-rodbolts. Removetwelve~dged socket wrench insert aft 14 mm and connecting-rodbearing cap. I-_.::::::::::-- @ -:-- 70. Identify pistons of cylinder 4 -6. 0 Lever off front piston pin circlip. Push out 0 ~ piston pin. Allocate the same corresponding pistons to the piston pins again after disassembly. -~ @ @ ~ .-1""'1 506_97 10 -48 10 01 37 Disassembling and assembling engine 9961033 Printed in Germany -19, 1998