Disassembling and assembling engine -GT3 · Location Thread

Disassembling and assembling engine -GT3 Location Thread Tightening torque in Nm Clutch pressure plate M8 23 (17 ftlb.] Clutch flywheel M lOxl 90 (67 ftlb. Crankcasebolts M lOxl.25 50 (37 ftlb.) Crankcase bolts M8 23 (17 ftlb. Camshafthousing M8 23 (17 ftlb.), then 28 (21 ftlb.) Camshafthousing cover M6 10 (7.5 ftlb.) Camshaftbearinghousing M6 13 (9.5 ftlb.) Camshaftwheel (outlet) M 12xl.2 30 (22 ftlb.), then 900 turn Camshaftadjuster M 12xl.5 30 (22 ftlb.), then 1300 turn Oil drain plug on the oil container M 20xl.5 60 (44 ftlb, Oil drain plug (crankcase) M 20xl.5 60 (44 ftlb.) Oil extraction pump M6 13 (9.5 ftlb.) Oil extraction pump cover M6 10 (7.5 ftlb.) Oil container fastening M8 23 (17 ftlb.) Oil filler neck M6 10 (7.5 ftlb.) Oilfilter housing M8 23 (17 ftlb.) Oil guide housing M6 10 (7.5 ftlb. Thrust bearing cover M6 13 (9.5 ftlb. Connectingrod M 9xl.25 30 (22 ftlb.), then 900 turn; use special grease 000.043.30012 without fail. The con-rod bolts must be replaced after they have been unscrewed. 10 -84 10 01 37 Disassembling and assembling engine -GT3 9961069 Printed in Germany -39, 2000